WARNING
Always wear EYE and EAR
safety gear when working with
or in the vicinity of the Paslode
Cordless Stapler.
WARNING
The Paslode Cordless
Stapler should be
operated only when it is
in contact with the work
surface. When fastening
thin materials such as
plywood, be sure to
position the tool so that
the fastener is driven
into the underlying
piece.
SAFETY INSTRUCTIONS
1. WEAR EYE AND EAR PROTECTION.
2. ALWAYS ASSUME THE TOOL IS "LOADED".
3. OPERATE THE TOOL ONLY ON THE WORK
SURFACE.
4. NEVER REMOVE OR DISABLE THE WORK
CONTACTING ELEMENT.
This device helps reduce the possiblity of accidental fastener discharge by
preventing the tool from operating until it is completely against the work
surface.
NEVER operate the tool if the work contacting element is not working
properly.
5. ALWAYS POINT THE TOOL AWAY FROM
YOURSELF AND OTHERS WHEN CLEARING
JAMS OR REMOVING FASTENERS.
Pull the follower slightly back and push the release lever. Tip the tool
nose up slightly and fasteners should slide out of the rear of the magazine.
If fasteners are jammed, refered to the appropriate service section
of the operating manual.
6. NEVER ATTEMPT TO OPERATE THE PASLODE
CORDLESS STAPLER IF PARTS ARE LOOSE,
DAMAGED OR MISSING.
Summary of Contents for IM200
Page 3: ...33 30 ...
Page 4: ...45 51 44 optional ...
