WELCOME MESSAGE
With this item of the menu, the user can have the welcome message each time the ignition is
turn on.
On default the function is enable but it’s possible to disable it.
By selecting this function, the kit will pronounce WELCOME MESSAGE: now it’s possible to
choose the parameter in a range of two values: Enabled, Disabled
The deactivation of this function doesn’t interact with the activation of the system.
Instead it happen the opposite: the welcome message, if activate, updates the status of the sys-
tem at every ignition.
For example, if the system is active, the vocal synthesis will pronounce:
SYSTEM ENABLED
If the system is not active, the vocal synthesis will pronounce:
SYSTEM DISABLED
WARNING THRESHOLD DISTANCE
With this function
the user can set a value of kilometres and have a sure information about the
kilometres covered by the tyres in use.
By selecting this function, the kit will pronounce
WARNING THRESHOLD DISTANCE
:
now it’s possible to choose the parameter in a range of some values:
15000 km
20000 km
30000 km
40000 km
Disabled
Once reached the number of kilometres set, the module will keep in memory the information and
at the next ignition of the car, the system will pronounce the message:
Warning threshold distance
SPEED LIMIT
With this function, the user can set a value in km/h: the system will do a notification every time
the vehicle overcomes the value preset.
This function preserve the user to all risks about the high speed and it helps to avoid some sanc-
tions.
By selecting this function, the kit will pronounce SPEED LIMIT;
ITt’s possible to choose the parameters in a range of values:
30 km/h
50 km/h
6
3
1
L
Enter the Menu
To enter the menu please use the button supplied with the kit. Switch on the ignition and the
module will announce the welcome message.
Press 3 times the button to enter the menu.
To scroll the menu voices press one time the button.
To confirm the choice or enter a sub menu press the button for 3 seconds.
The menu is ordered in a circular selection, for example considering the main menu, the last
voice will be followed by the first voice.
The voices available are:
1.
Reading the system status.
2.
Reset the tyres status elaboration.
3.
Reset odometer
4.
Odometer value
5.
Settings
6.
Exit
Calibration
Once the installation is done, it’s is necessary to proceed with optimal tyres inflation.
The standard range is 2.2 bars for the front-wheels and 2.0 bars for the rear-wheels.
Anyway, Paser recommend to follow the parameters suggested by the manufacturer of the tyres.
Once the pressuring verification, it’s necessary to calculate the status of the tyres; to do this
operation is necessary to consult the menu of the system. (see the paragraph called RECALCU-
LATION OF THE TYRES CONDITION).
Reading the system status
By checking this item, the unit says immediately last detected status of the tyres pressure, for
example if everything is right, the speech synthesis module says:
THE TYRES ESTIMATED PRESSURE WAS NORMAL.
3
Functions Management
The module in object is able to monitor tire pressure.
The unit has several features such as, for example, querying system status, parameter setting,
language selection etc.
All operations are available through speech menu.
By following a simple procedure with the steering wheel commands, check and set the desired
functions available in the menu as described in the following pages.
