pascom DPT-9602, Operation Manual

Page: 7 / 22

FRONT PANEL FRONT PANEL
* VOICE MEMORY ADJUSTMENT *
1) Set Day and Time by DAY UP/DOWN and TIME UP/DOWN buttons.
2) Press MELODY/VOICE button twice and make sure VOICE LED is on.
※
Default output channel is previously set channel, voice number is 01.
(If wanted, you can switch order of step 1) and 2).)
3) Choose voice number by MELODY/VOICE UP/DOWN buttons.
- Press and hold MELODY/VOICE button for 1 second, and number
on screen passes quickly.
4. VOICE MEMORY
- Press MELODY/VOICE button, and make sure VOICE LED turns on. Then, adjust day
and time, and also set VOICE number and output channel, by VOICE UP/DOWN, DAY
UP/DOWN, TIME UP/DOWN buttons.
- Save and exit by MEMORY/PLAY button.
on screen passes quickly.
- voice number ranges 1 to 99.
4) After voice number is set, choose output channel by CHANNEL/WEEK
button. The number of selected memory will flash twice.
5) Choose output channel by CH1~CH4 buttons.
(Press once, and channel turns on. Press again, and it turns off. TOGGLE type)
6) Save and exit by MEMORY/PLAY button, after “Set” on screen flashes twice.
For more than 1 VOICE MEMORY, repeat step 1)~5).
7) Press CLEAR/EXIT after VOICE MEMORY is completed, and then it comes
back to show current time.
※
In case you want to exit without save, press CLEAR/EXIT during
VOICE MEMORY adjustment, before completed.