2
12 Volt AC/DC Power Supply
012-02816C
Equipment Return
Should this product have to be returned to PASCO scien-
tific, for whatever reason, notify PASCO scientific by let-
ter or phone BEFORE returning the product. Upon noti-
fication, the return authorization and shipping instructions
will be promptly issued (see reverse side for packing
instructions).
➤
NOTE: NO EQUIPMENT WILL BE
ACCEPTED FOR RETURN WITHOUT AN
AUTHORIZATION.
When returning equipment for repair, the units must be
packed properly. Carriers will not accept responsibility
for damage caused by improper packing. To be certain
the unit will not be damaged in shipment, observe the fol-
lowing rules:
➀
The carton must be strong enough for the item shipped.
➁
Make certain there are at least two inches of packing
material between any point on the apparatus and the
inside of the carton.
➂
Make certain that the packing material cannot shift in
the carton, or become compressed, thus letting the in-
strument come in contact with the edge of the carton.
Limited Warranty
PASCO scientific warrants this product to be free from
defects in materials and workmanship for a period of one
year from the date of shipment to the customer. PASCO
will repair or replace, at its option, any part of the product
which is deemed to be defective in material or workman-
ship. This warranty does not cover damage to the product
caused by abuse or improper use. Determination of
whether a product failure is the result of a manufacturing
defect or improper use by the customer shall be made
solely by PASCO scientific. Responsibility for the return
of equipment for warranty repair belongs to the customer.
Equipment must be properly packed to prevent damage
and shipped postage or freight prepaid. (Damage caused
by improper packing of the equipment for return ship-
ment will not be covered by the warranty.) Shipping
costs for returning the equipment after repair will be paid
by PASCO scientific.
Specifications
AC: 1 to 12 volts (RMS), unregulated, selectable in 1 volt
increments; current up to 6 amps.
DC: 1 to 12 volts, unregulated, unfiltered, (full wave rec-
tified), selectable in 1 volt increments; current up to 6
amps.
AC and DC outputs are available simultaneously, and
both are protected from current overload by a common 6
amp thermally activated circuit breaker.
Total maximum output current is limited to 6 amps.
➤
Caution: AC and DC outputs are not indepen-
dently floating. Cross-connection could result in
internal damage
Other PASCO Power Supplies
PASCO scientific offers a variety of rugged, reliable
power supplies. From low-voltage, fixed-output supplies
to a 6 KV DC supply, all PASCO power supplies are easy
to use, ruggedly built, and short circuit protected for long
life in the student lab. For information, check our catalog
or call toll-free 1-800-772-8700.
Parts List
*:
➤
Caution: If repairs are needed, they should be
performed only by experienced personnel.
REFERENCE
PART
MDA 3502
D1
4 AMP SLOW
F1
THERM FUSE
F2
TERMINAL
Power
100R
R1
R100
R2
NT 15050
T1
*
When ordering parts, be sure to indicate the product num-
ber (SF-9582), the part number, and the part description
