Wir
Wireless pH Sensor
eless pH Sensor
PS-3204
About the Pr
About the Product
oduct
The Wireless pH Sensor measures the pH of a solution within a range
between 0 and 14 pH. The pH measurement is transmitted wirelessly
through Bluetooth and displayed in PASCO data collection software.
The pH Sensor can also be used with alternative probes, such as Ion
Selective Electrodes (ISE) and the Oxidation Reduction Potential
Probe.
What'
What's Included
s Included
• Wireless pH Sensor
• pH Probe
Requir
Required Items
ed Items
• Data Collection Software
Data Collection Software
This product requires PASCO software for data collection and
analysis. Either SPARKvue or PASCO Capstone can be used.
P
Par
art names and descriptions
t names and descriptions
1
2
3
4
5
6
7
8
Battery Status Light
Battery Status Light
When the light blinks red, the battery is near the end of its life
and will need to be replaced soon.
1
Device ID
Device ID
Use to identify the sensor when connecting using Bluetooth.
2
BNC Connector (Sensor)
BNC Connector (Sensor)
Use to connect the sensor to the pH probe. Can also be used for
connecting various ion selective electrodes, the Oxidation
Reduction Potential Probe (PS-3515), and the Flat pH Probe
(PS-3514).
3
Power Button
Power Button
Press and hold for one second to turn the sensor on or off.
4
Bluetooth Status Light
Bluetooth Status Light
Indicates the status of the Bluetooth connection.
LL
IGHT
SS
TATUS
Red (blink)
Ready to pair
Green (blink)
Paired
Yellow (blink)
Remotely logging data
5
Storage Bottle
Storage Bottle
Contains pH storage solution to keep the probe hydrated while
not in use. Remove the storage bottle from the probe before
taking measurements.
6
Storage Bottle Cap
Storage Bottle Cap
The cap can remain on the pH probe when the storage bottle is
removed. Push the cap to the top of the pH probe when taking
measurements.
7
BNC Connector (pH Probe)
BNC Connector (pH Probe)
Use to connect the probe to the pH sensor. Push and turn
clockwise until the connector locks in place.
Note: When connecting the probe, hold it by the connector
and not by the shaft. Twisting the shaft can damage the probe.
8
Product Guide
012-14662C
Wireless pH Sensor | 1
