®
P S - 2 0 0 6 G L X P o w e r A m p l i f i e r
O u t p u t S c r e e n
6
Wave Polarity
This setting has two options:
Positive
and
Negative
,
which affect the output functions as illustrated.
To Turn the Output On or Off
•
Press
.
To Change an Output Setting
Use the arrow keys to highlight a setting in the Output screen. Use one
of the following methods to change the value of the setting.
Method 1 (for Output Device, or Waveform):
1.
Press
. A menu opens.
2.
Use the arrow keys to highlight a menu option and press
Method 2 (for Amplitude, Voltage, Offset, Frequency, or
Period):
•
Press
or
to increase or decrease the value.
Method 3 (for Frequency or Period):
•
Press
or
to increase or decrease the value.
Note: The increment or factor by which the value changes is determined by the
Step Size
setting (see below).
Method 4 (for Amplitude, Voltage, Offset, Frequency, or
Period):
1.
Press .
2.
Type the desired value and press
.
Method 5 (for Period Units, Repeat Mode, or Wave Polarity):
•
Press
. The setting switches to the other option.
To Change the Step Size
1.
Use the arrow keys to highlight
Voltage
,
Amplitude
,
Offset
,
Fre-
quency
or
Period
.
2.
Press
. A menu opens.
3.
Use the arrow keys to:
•
Highlight a standard step size and press
.
or
a.
Highlight Custom Step and press
.
b.
Type a step value and press
.
F1
+
X
F2
