![background image](http://html1.mh-extra.com/html/pasco/pasport-ps-2177/pasport-ps-2177_instruction-sheet_3896778004.webp)
®
Light Level Sensor
Setup
4
Select a Display
To set up a particular display (e.g., digits display), touch BUILD. Touch a quantity
from the list, and then touch one of the display icons. Touch OK to open the display,
and then touch the
Start
button to begin collecting data.
Calibration
You do not need to calibrate the Light Level Sensor
Specifications
Accuracy
: ±10%
Maximum Sample Rate
: 1000 Hz
Technical Support
For assistance with any PASCO product, contact PASCO at:
For more information about the Light Level Sensor and the latest revision of this Instruc-
tion Sheet, visit: www.pasco.com/go?PS-2177
Limited Warranty
For a description of the product warranty, see the PASCO catalog.
Copyright
The
PASCO scientific 012-11060A
Light Level Sensor Instruction Sheet
is copyrighted with all rights
reserved. Permission is granted to non-profit educational institutions for reproduction of any part of this
manual, providing the reproductions are used only in their laboratories and classrooms, and are not
sold for profit. Reproduction under any other circumstances, without the written consent of PASCO sci-
entific, is prohibited.
Trademarks
PASCO, PASCO scientific, DataStudio, PASPORT, Xplorer, and
Xplorer GLX are trademarks or registered trademarks of PASCO scientific, in the United States and/or
in other countries. For more information visit www.pasco.com/legal. Windows is a registered trademark
of Microsoft Corporation in the United States and/or other countries. Mac is trademark of Apple Com-
puter, Inc., registered in the U.S. and other countries.
Product End of Life Disposal Instructions:
This electronic product is subject to disposal and recycling regulations that vary by
country and region. It is your responsibility to recycle your electronic equipment per
your local environmental laws and regulations to ensure that it will be recycled in a
manner that protects human health and the environment. To find out where you can
drop off your waste equipment for recycling, please contact your local waste recy-
cle/disposal service, or the place where you purchased the product.
The European Union WEEE (Waste Electronic and Electrical Equipment) symbol (to
the right) and on the product or its packaging indicates that this product
must not
be
disposed of in a standard waste container.
Address: PASCO scientific
10101 Foothills Blvd.
Roseville, CA 95747-7100
Phone:
916-786-3800 (worldwide)
800-772-8700 (U.S.)
Fax:
(916) 786-3292
Web:
www.pasco.com
Email: