background image

Mini Launcher

012-05479B

®

32

Tape a piece of white paper to the board in the region where the ball is hitting. Then
cover the white paper with a piece of carbon paper.

Procedure

Shoot the ball at various angles and pinpoint exactly which angle gives the maximum
height by checking the marks on the paper.

Measure the angle that produces the maximum height and record in Table 7.1.

Measure the maximum height and record in Table 7.1.

Measure the horizontal distance from the muzzle to the vertical board and record in
Table 7.1.

Measure the initial height of the ball where it leaves the muzzle and record in Table 7.1.

Analysis

Calculate the initial velocity by solving the y-equation for v

0

 and plugging in the values

from Table 7.1.

Calculate the angle for maximum height using the initial velocity calculated in Step 1
and the horizontal distance from the wall to the launcher.

Calculate the percent difference between the measured angle and the calculated angle.

Questions

For the angle at which the ball strikes the wall at the maximum height, has the ball
already reached the peak of its trajectory when it strikes the wall?

How far from the wall would you need to place the launcher so that when the ball is
launched at 45° it strikes the wall at a maximum height? What would the maximum
height be in this case?

Measured Angle for Max

Maximum Height

Horizontal Distance

Initial Height

Calculated Initial Velocity

Calculated Angle for Max

% Difference Between Angles

Table 7.1 Data and Results

Summary of Contents for MINI LAUNCHER ME-6825A








































Reviews: