Attach the Track Rod Clamp to a Dynamics Track
Figure 3. A Track Rod Clamp attached to a Dynamics Track and support rod.
The Track Rod Clamp is used to elevate a PASCO Dynamics Track to create an incline.
The clamp holds the track to a support rod. To attach the clamp to a track:
1. Insert the square nut on the clamp into the T-slot of the dynamics track.
2. Insert a 0.5 inch rod into the clamp.
3. Adjust the track and clamp until the track is placed at the desired angle.
emoji_objects
TIP:
Place the clamp as close to the inclined end of the track as possible for
stability.
4. Turn each thumbscrew to secure the clamp to the rod and track.
Basic Smart Cart PAStrack System | ME-5707A
6