manualshive.com logo in svg

Pasco Scientific ME-6825, Instruction Manual And Experiment Manual

Share
Download
Pasco Scientific ME-6825 Instruction Manual And Experiment Manual Download Page 36

Mini Launcher

012-05479A

32

➃

 Tape a piece of white paper to the board in the region where the ball is hitting. Then cover the
white paper with a piece of carbon paper.

Procedure

➀

Shoot the ball at various angles and pinpoint exactly which angle gives the maximum height
by checking the marks on the paper.

➁

Measure the angle that produces the maximum height and record in Table 7.1.

➂

Measure the maximum height and record in Table 7.1.

➃

Measure the horizontal distance from the muzzle to the vertical board and record in Table 7.1.

➄

Measure the initial height of the ball where it leaves the muzzle and record in Table 7.1.

Analysis

➀

Calculate the initial velocity by solving the y-equation for v

0

 and plugging in the values from

Table 7.1.

➁

Calculate the angle for maximum height using the initial velocity calculated in Step 1 and the
horizontal distance from the wall to the launcher.

➂

Calculate the percent difference between the measured angle and the calculated angle.

Questions

➀

For the angle at which the ball strikes the wall at the maximum height, has the ball already
reached the peak of its trajectory when it strikes the wall?

➁

How far from the wall would you need to place the launcher so that when the ball is launched
at 45° it strikes the wall at a maximum height? What would the maximum height be in this
case?

Measured Angle for Max

Maximum Height

Horizontal Distance

Initial Height

Calculated Initial Velocity

Calculated Angle for Max

% Difference Between Angles

Table 7.1 Data and Results

Summary of Contents for ME-6825











































Reviews:

No comments

Brands by name

Popular brands

Load more brands