2
BASIC FEATURES
Proceeding from top to bottom in the diagram to the left, the key components of
the PAS V are:
Flashlight:
1000 lumen LED bulb can
operate in three modes: High, Low and
Strobe.
Charger Connection:
The Charger
Key, located on the backside of the
tube, slides into AC/DC charger rack.
Flashlight Control Switch:
Large
positive-feedback switch.
Sampling Ports:
Two small holes let
the air sample pass through the PAS.
The inlet port is on the right side of the
unit, and the outlet port is on the left
side.
UV Light:
The blue UV light is mounted
on the underside of the unit and is
illuminated whenever the flashlight is on
for use in investigations.
Bar-Graph Display:
Nine rectangular
LED lamps give an indication of the
alcohol level in the sample. The display
is color-coded for easy reading at night
(see page 10)
Calibration Port:
Small plastic plug in
back of tube for access to calibration
pot.
Sensor Control Button:
Positive
feedback switch. Auto Reset/Shut off
after 45 seconds or manually override
by pressing and releasing switch
.
Battery Tube:
The PAS V uses a high-
capacity rechargeable NiMH (no
memory) battery.
