www.parweld.com
www.parweld.com
9.3 Gas equipment
Everyday Gas Regulators – 300
BAR
Single Stage
Features
Flow rate up to 96m
3
/h (3389 ft
3
/h)
• Full 300 bar capability
• Outlet pressure indicated on the bonnet
• Bottom entry design suited for top outlet
cylinder valves
Fittings
• Fitted with standard
3
/
8
9 BSP outlet
• Fitted with
5
/
8
9 BSP inlet connections
Stock Code
Description
Maximum Outlet Pressure
E700140
Argon Preset Regulator 3.0 Bar
E700141
Argon Indicator Regulator 3.0 Bar
E700113
1 Gauge Argon
30 lpm flow
E700123
2 Gauge Argon
30 lpm flow
Flow Meters
Features
• Designed from brass bar whilst the
tube and cover are moulded from high
quality polycarbonate to ensure high
impact resistance and clarity
• Calibrated to operate at an inlet
pressure
of 30PSI
• Sensitive needle valve provides easy
adjustment and the downward facing
outlet connection eliminates hose
kinking.
Fittings
• Fitted with standard
3
/
8
9 BSP inlet and outlet connections
Stock Code
Description
706101
Flow Meter Mixed Gas 25 lpm (MIG)
Gas flow Tester
• Designed to check gas flow at the front of Mig Torches.
Stock Code
Description
806001
Gas flow Tester
14
10.0 EC declaration
of conformity
Hereby we declare that the machines as stated below
Type: XTE171C, XTE181C, XTE201C
Conform to the EC Directives: 2014/35/EU Low Voltage Directive,
2014/30/EU EMC Directive
European standard: BS EN/IEC 60974-1: 2012 Arc welding
Equipment Part 1 Welding power sources.
EN 60974-10 2014 Arc welding Equipment Part 10- EMC
compatibility requirements
EN 60974-5: 2013 Arc Welding Equipment Part 5 Wire feeders
This is to certify that the tested sample is in conformity with
all provisions of the above detailed EU directives and product
standards.
10.1 Rohs Compliance Declaration
2011/65/EU - RoHS Directive
Restriction of use of certain hazardous substances in electrical and
electronic equipment
Type: XTE171C, XTE181C, XTE201C
The above listed products are certified to be compliant with the rohs
directive with all homogeneous component parts being controlled to
ensure material contents as per the list below.
Cadmium 0.01% by weight
Lead 0.1% by weight
Mercury 0.1% by weight
Hexavalent chromium 0.1% by weight
Polybrominated biphenyl’s (pbbs) 0.1% by weight
Polybrominated diphenyl ethers (pbdes) 0.1% by weight
It should be noted that under specific exempted applications, where
lead is used as an alloying element the following limits are applied in
accordance with the regulations.
Copper and copper alloy parts use less than 4% by weight of each
homogeneous component.
Steel and steel alloy parts use less than 4% by weight of each
homogeneous component.
Aluminium and aluminium alloy parts use less than 4% by weight of
each homogeneous component.
Only dispose off in authorised sites for electrical and electronic
waste do not dispose of with general refuse or landfill waste.
