SETTING UP THE TENT
1. With two people, hold the centre of the scissor element on the short side of the frame and
walk further backwards. Pull the tent fully open. With the larger sizes (3 x 6, 4 x 6 and 4 x
8) it can sometimes be slightly more difficult to click the roof frame together. In that case,
it is advisable to push the tent upwards beneath the central pole(s).
2. Place your foot on the baseplate and push the roof frame for each leg up until it clicks into
place.
3. Push the tension straps on the inside of the roof through the square opening and secure
them. Tension the straps tightly.
4. With two people, lift one side of the tent up and pull on the pin near the bottom of the legs.
Slide the legs out until you hear a click. Do this either on one short side or one long side of
the tent, but never with two diagonally opposite legs.
5. Repeat step 4 on the other side of the tent.
FITTING THE SIDE WALLS
1. Attach the flaps on one side of the first side wall from top to bottom to a leg. The opening
in the canvas goes around the pin of the leg.
2. Affix the Velcro at the top of the side wall to the inside of the roof. Begin on the side where
the side wall has already been attached to the leg.
3. Attach the flaps on the other side of the side wall from top to bottom.
4. Affix the flaps on one side of the second side wall to the rear of the side wall already fitted.
5. Affix the Velcro at the top of the side wall to the inside of the roof. Begin on the side where
the side wall has already been attached to the previous one.
6. Repeat step 3. Attach all the side walls in the same way.
12
13
FLEXXUM - MANUAL
FLEXXUM - MANUAL
EN
EN
1.
1.
3.
3.
2.
2.
4.