INSTALLATION
1. Open the box. Remove all packing materials.
2. The heater comes with a ring on top to hang it up to the ceiling, bracket or wall. Do not
hang it in any other position but horizontal, with the reflector on the top.
3. Make sure that the ceiling, wall, heater post to which it will be mounted can support about
4 times the heaters’ weight.
4. The chain comes with 2 carabiners. Connect one carabiner to the ring on the wall, another
carabiner connects to the ring on the heater.
5. If there are no rings on the wall. You need to install it by yourself. And you should make
sure the ring is installed in solid concrete ceiling or similar construction.
6. Please use rope to tie the power cord and chain. And make sure the heater is hung by the
chain, not by the power cord.
7. Insert the plug into socket. Now your heater is ready for use.
OPERATION:
1. Turn the power switch to the “ON” position.
2. Press button
on the remote control
or on the heater (f ig.1) once to get 900 W
of power.
3. Press button
on the remote control or
press the button on the heater twice (f ig.1)
to get 1200 W of power.
4. Press button
on the remote control
one more time or press the button three
times (f ig. 1), to get 2100 W of power.
5. Press the button on the remote control
to turn off the heater, and turn the power
switch on the heater to “OFF”.
FIREFLY 2100 | MANUAL
