© PartyFunLights.com
4. Connect the end of the light strip
with the LED / USB connector. Make
sure the arrows line up for it to
function.
5. Connect the USB cable to the USB
port or USB wall connection.
6. Remove the tab from the battery
compartment of the remote control.
7. Turn on the LED strip light by
pushing the ON button on the
remote control, pointing it towards
the lights.
8. You are now able to use the lights
and select your desired light
function.
9. Once you have finished using the
lights, press the power button to
turn OFF, unplug the cables and
store in a safe place.
Shortening the strip
You can cut the light strip to shorten
the length. Make sure you cut in the join
section and cut away from the ends.
WARNING: Attention risk of electric
shock! Always unplug the power cord
before shortening the LED strip.
Remote control
1. On/Off switch
2. White light
3. Flash
4. Strobe
5. Fade
6. Smooth
7. Control panel for colour selection
8. Red, Green, Blue colour
9. Increase/ decrease the brightness,
fast or slow rate in light modes mode
The colour settings are mixed colours.
For this reason colours may vary slightly.
9
8
7
1
2
3
4
5
6
