Step 5
Install Input Tubing
Find the bags labeled “Input Tubing for
Front Row” and “Input Tubing for Back
Row.”
Feed the flat ends of these tubes through
15 compression nuts (K). Make sure the end
of each tube sticks out of the nut by about
1/4” on the side of the nut that says “>PP<”
on it.
If it’s hard to feed the tubing through the
opening, try using the chopstick to widen it.
Turn each tube with compression nut
onto the right (input) port of each
dispenser until it is finger tight. You
should only see one or two threads
remaining.
Bartendro
TM
B15
-7-
Input
Output
K
Note: Tablet Mounting
(optional)
There are two holes on the right side of
the frame designed to fit RAM-B-309-1
from www.rammount.com. This part is not
included, and if you use it, you will also need
to get an arm and specific cradle for your
device.
