3. Install The Front Windshield
Snap the windshield into place by inserting the latches on the bottom ends of the
windshield into the grooves on the car.
4. Install The Steering Wheel
Remove the screw and nut from the column of the steering wheel. Connect the wire
terminal on the steering wheel to the wire terminal coming out of the steering yoke on the
car body. Connect the steering wheel onto the steering yoke. Align the hole in the column
of the steering wheel with the hole on the yoke, and reinsert the screw and nut to secure.
5. Connect The Battery
The battery and connection assembly is located in the area under the seat. Connect the
red plug from the wire assembly to the red plug on the battery, and the black plug from the
wire assembly to the black plug on the battery. Be sure the connection is secure and
snugly fit into place.
(7)
6. Install The Seat & Rearview Mirrors
Place the seat latch located on the bottom of the car seat into the groove under the seat
on the car body. Lean the chair back and snap the latches on the top back ends of the
seat into the grooves on either end behind the seat back. Insert the rearview mirrors into
the holes on the car body and secure with screw. (Mirrors may already be installed.)
7. Charge The Battery
Plug the charger into the charger input located under the passenger side of the seat
(Figure 7). Plug the charger into a power outlet (Figure 7-1).
NOTE: The car will not run
or power on while charging. CHARGE FOR 18 HOURS ON INITIAL CHARGE.
Charge for 8-12 hours for normal charge.
NEVER charge for more than 20 hours.
8. Remote Control Operation
Install 2 x AAA batteries (not included) to power
the remote control.
Press CAR SELECT to pair remote with the
vehicle.
Press the SPEED SELECT button to shuffle
through slow, medium and fast speeds. Lights
will blink faster or slower to indicate speed
setting.
(8)
