Page 2
6
Using a flathead screwdriver, loosen the 3
screws on the mounting assembly.
8
Remove the old flange from the sink.
10
Evenly apply a 1/2” thick rope of plumber’s
putty (45325) around the new sink flange
from kit SF1.
11
Press the new sink flange firmly into the sink
drain. Remove the excess plumber’s putty.
12
Place a weight, such as the old disposer, on
the sink flange to hold it in place. Use a soft
cloth such as a towel to avoid scratching the
sink.
9
Remove old plumber’s putty from the sink.
7
Using a flathead screwdriver, pry off the snap
ring. The fiber gasket, backup flange &
mounting ring can be removed.
13
Insert the fiber gasket , backup flange, &
mounting ring. Hold in place while inserting
the snap ring. Pull the snap ring open and
press firmly until it snaps into place.
