If you are replacing an existing dis-
poser, continue to Step 2. If there is
no existing disposer, disconnect sink
drain and skip to Step 9.
Disconnect electrical power at fuse box or
circuit breaker box. Disconnect drain trap
from waste discharge tube. Disconnect the
dishwasher if connected to the disposer.
Support disposer, insert end of wrenchette
into right side of mounting lug, and turn. Dis-
poser will fall free.
Invert the disposer and remove the electrical
cover plate.
1
2
3
SHOCK HAZARD
FALLING HAZARD
GD12
½
HP GARBAGE DISPOSER
INSTALLATION & USER INSTRUCTIONS
Disconnect the disposer wires from the
electrical supply.
5
4
Is the new disposer mounting
the same as the old one?
If YES, skip to Step 15.
If NO, continue to Step 6.
You must install Part # SF1
available separately.
Page 1
