22
2)
Heartbeat measure
(1)
Precaution at the time of measuring heartbeat
①
In case that band is moved as band is not adhered to wrist closely during heartbeat
measurement, result of measurement may be incorrect.
②
If moving band to upper thick part after wearing on wrist, more close adherence is
ensured.
③
Pay your attention so that heartbeat sensor of band would be adhered to skin from the
time of starting measurement until its completion.
④
In case that there is any unnecessary hindrance between the device and skin, be sure
to measure after removing such hindrance.
⑤
If measuring by pushing heartbeat measurement mode twice continuously, progress
mark is indicated and after percentage against heartbeat and max. heartbeat is
appeared and then stabilized, measurement is finished and its result value is indicated.
(app. 30 seconds required)
⑥
If pushing button twice in screen showing heartbeat measurement value after heartbeat
measurement is finished, it is converted to re-measurement mode and then it is
finished after re-measurement.
⑦
If you wish to measure continuously, push button three times continuously under the
condition that measurement is completed. (during continuous measurement, heartbeat
is updated at every 1 second.)
⑧
If pushing button once during continuous measurement, it is moved to next mode
(altitude0>
⑨
If pushing button twice during continuous measurement, measurement is finished and
finally measured heartbeat is indicated.
