4
II. Start Use Headset
Charging the Battery
For first time used, before you can use your headset, you need to charge its
self-contained battery for two hours.
Recharging-When you see LED at glimmering red light, the headset battery
needs to be recharged. It will take approximately 2 hours to fully charge the
battery.
To Recharge the Battery
1. Plug the travel charger into an AC outlet.
2. Connect another end of DC power plug into charging port of headset.
3. The red indicator on the headset turns on.
4. When the battery is full, the red indicator turns off.
A fully charged headset battery will provide up to 7 hours of talk time, and up
to 170 hours of standby time.
Turning the Headset On/Off
Turning On
1. To turn power on by pressing and hold the MFB button.
2. Wait for more than 5 seconds until the blue light is ON.
3. Release button.
4. The headset speaker sounds low to high tone.
5. The blue light flashes two times of every three seconds.
Note: If the headset battery is low, the red light on the headset will turn on.
Turning Off
1. To turn power off by pressing and hold the MFB button.
2. Wait for more than 5 seconds until the blue light and red light is ON.
3. Release both button.
4. The headset speaker sounds high to low tone.
5. The blue light and red light turn off.
