※
It takes approximately 2 hours to have it fully charged when battery exhausted
3. Battery Status Alarm & Alert
- Press Call and button at the same time for a second for audio
guidance for the current battery level.
“Battery Full” / “Battery Half” / “Battery not enough”
4. Low Battery Alarm & Alert
-
The red LED light flashes 3 times with voice guidance “Battery not enough” if the battery
is less than 1 hour use.
5. Critical Battery
- The notice continues every 2 minutes if the battery is less than 10 minutes use and
power is turned off with voice guidance “Battery Empty” at the critical battery.
6. Pairing
Before using the headset for the first time, you must pair it with a Bluetooth-enabled Device.
* Pairing : Connect between Bluetooth-enabled Device and Headset.
- Press the call button for 1 second to turn on the device
- After power on, the headset will automatically enter to pairing mode.
(The red/blue LED light flashes)
- The headset will automatically enter to waiting mode if it is not connected for 3 minutes.
(The power is automatically after 50 minutes with waiting mode)
- On the device you want to have paired, find the Bluetooth menu and search & select
“
PBH-400
” from the list of devices.
-
If connected without any problem, the headset will be paired with audio guide “Connected”
- Once pairing is complete, it will be paired automatically afterwards.
※
Manual Pairing
- Hold Call button for 2 second while placing power slide switch to ON then it will enter to
Pairing mode with voice guide “Start pairing”. And Register the
PBH-400 in above same way.
