Parton PTD-400, Manual

Page: 10 / 21

Error message Abnormality Solution
It will display this
message when the
room temperature is
outside the operational
temperature range of
15°C to 40°C.
- Leave the thermometer
for at least 30minutes in
the ambient temperature
environment available before
measurement.
- If the same message is
displayed afterwards, contact
the customer service center.
/ In the Event of Abnormalities /
/ Product Storage and Care /
1. As the sensor part is very sensitive, always keep it clean and not
damaged for accurate measurements.
2. Avoid fire and direct sunlight and store in a place free of dust or
pollutants.
3. Store it in a place out of water.
4. Store it in a place where vibration or shock does not occur.
5. We recommend keeping the product at room temperature,
and if it is stored outside of room temperature, keep it at room
temperature for 30 minutes before use.
6. In case of sensor and case contamination, carefully wipe with a
cotton swab or alcohol cotton coated with ethylalcohol 70%
diluted solution. (Recommended to use about 20 minutes after
cleaning the sensor)