manualshive.com logo in svg

Partner WT-100, Service Manual, Page: 5 / 70

Share
Download
Partner WT-100 Service Manual Download Page 5

iii

TABLE OF CONTENTS

CHAPTER 1 GETTING STARTED ................................................ 1

Unpacking the machine .................................................................................1

Identifying components  .................................................................................2

CHAPTER 2 BIOS SETUP ............................................................ 5

About the Setup Utility ...................................................................................5

Entering the Setup Utility  ..........................................................................6

BIOS navigation keys ................................................................................6

Using BIOS  ...............................................................................................7

Main Screen ...................................................................................................8

Advanced Settings .........................................................................................9

IDE Configuration

 ....................................................................................10

Primary/ Secondary IDE Master ..............................................................11

CPU Configuration

 ...................................................................................12

MPS Configuration

 ...................................................................................13

SuperIO Configuration

 .............................................................................14

Hardware Health Configuration

 ...............................................................15

ACPI Configuration

 ..................................................................................16

USB Configuration

 ...................................................................................17

Boot Settings Configuration

 .........................................................................18

Boot Device Priority .................................................................................19

Hard Disk Drives ......................................................................................20

Boot Settings Configuration

 .....................................................................21

Chipset Settings ...........................................................................................22

North Bridge Chipset Configuration

 .........................................................23

South Bridge Chipset Configuration

 ........................................................24

Security Settings ..........................................................................................25

Exit Menu .....................................................................................................26

CHAPTER 3 INSTALLING DRIVERS AND SOFTWARE ............ 29

Driver auto installation..................................................................................29

Intel Chipset Driver.......................................................................................30

Intel Chipset Graphics Driver .......................................................................32

LAN Driver ....................................................................................................34

Touch Screen Driver.....................................................................................36

Calibrating the touchscreen .....................................................................39

Summary of Contents for WT-100







































































Reviews:

No comments