Partner PT-9000, User Manual

Page: 78 / 115

錯誤
!
尚未定義樣式。
68
IDE Primary/Secondary Master/Slave
If you leave this item at Auto , the system will automatically detect and
configure any IDE devices it finds. If it fails to find a hard disk, change
the value to
Manual and then manually configure the drive by entering
the characteristics of the drive in the items below:
•
Capacity – displays the capacity of the HDD in megabytes (M).
•
Cylinder – indicates the number of cylinders that the HDD has. A
cylinder is the sum total of all tracks that are in the same location
on every disk surface.
•
Head – displays the number of heads in the HDD. A head is a
device that reads and writes data on the hard disk.
•
Precomp – displays the track where precompensation is initiated.
Precompensation is a feature whereby the HDD uses a stron ger
magnetic field to write data in sectors that are closer to the center
of the disk. In CAV recording, in which the disk spins at a
constant speed, the sectors closest to the spindle are packed
tighter than the outer sectors.
•
Landing Zone – displays the location of the safe non-data area
on a hard disk that is used for parking the read/write head.
•
Sector – displays the number of sectors available on the HDD. A
sector is the smallest unit of storage space on a disk.
Access Mode
This item defines special ways that can be used to access IDE hard disks
such as LBA (Large Block Addressing). Leave this value at
Auto and the
system will automatically decide the fastest way to access the hard disk
drive.
Press <Esc > to close the IDE device sub-menu and return to the Standard
CMOS Features page.
Drive A/Drive B (1.44M, 3.5 in./None)
These items define the characteristics of any diskette drive attached to the
system. You can connect one or two diskette drives.
Video (EGA/VGA)
This item defines the video mode of the system. This mainboard has a
built-in VGA graphics system; you must leave this item at the default
setting.