Partner M1-POS, User Manual

Page: 7 / 37

7
Install the battery: While hold up ‘Release latch’, gently push battery to the slot.
Remove the battery: While hold up ‘Release latch’, hold grooves both sides with
fingers and full to remove the battery.
B. Charge the Battery
Charging with the battery installed
①
Plug the A/C adapter into the power connector.
②
Place the device on the universal cradle.
Charging the battery alone
-
Place the battery downward to the charging connector on the Re-charger.
Battery indicator shows you three states of the battery below.
Charging
Fully Charged
Low Battery Indicator
Caution!
• Do not force to plug the device to I/O connector. It can be damaged.
• Charging with the battery installed: The battery indicator shows the battery status.
<LED indication>
Charging: red
Fully charged: green
2-3. Reset & Hard Reset
When system does not work properly, or does not response, press RESET button by
the stylus pen. You will lose unsaved files and every programs opened will closed. It
is same as RESET on Desktop. It is called ‘RESET’.
Press RESET button with pressing and holding down-left button and down-right
button. Then release RESET button and release others. Your device turns back to the
default setting. Your device loses every program, documents, and options saved in
RAM. It is called ‘HARD RESET’.
Before HARD RESET, you should try RESET to recover your device. Do not try
HARD RESET indiscreetly. HARD RESET does not delete files and documents in
FileBox folder. Back up important data to FileBox folder. When FileBox folder is
full, you can buy additional SD/MMC Cards for back-up.