Partner Customer Pole Display CD-5220, User Manual

Page: 10 / 21

CD5220 customer display
10
6. COMMAND
6.1 PTC standard mode command list
Command Code description(hex) Function description
ESC DC1 1B 11 overwrite mode
ESC DC2 1B 12 vertical scroll mode
ESC DC3 1B 13 horizontal scroll mode
ESC Q A.........CR 1B 51 41 [n ]x20 0D set the string display mode, write string to upper line
ESC Q B…......CR 1B 51 42 [n ]x20 0D set the string display mode, write string to lower line
ESC Q D.........CR 1B 51 44 [n ]xm 0D
m<40
upper line message scroll continuously
ESC [ D 1B 5B 44 move cursor left
BS 08 move cursor left
ESC [ C 1B 5B 43 move cursor right
HT 09 move cursor right
ESC [ A 1B 5B 41 move cursor up
ESC [ B 1B 5B 42 move cursor down
LF 0A move cursor down
ESC [ H 1B 5B 48 move cursor to home position
HOM 0B move cursor to home position
ESC [ L 1B 5B 4C move cursor to left-most position
CR 0D move cursor to left-most position
ESC [ R 1B 5B 52 move cursor to right-most position
ESC [ K 1B 5B 4B move cursor to bottom position
ESC l x y 1B 6C x y
1<=x<=20,y=1,2 move cursor to specified position
ESC @ 1B 40 initialize display
ESC W s x1 x2 y 1B 57 1 x1 x2 y
1<=x1<=x2<=20 y=1,2 set or cancel the window range at horizontal scroll mode
CLR 0C clear display screen , and clear string mode
CAN 18 clear cursor line, and clear string mode
ESC * n 1B 2A n 1<=n<=4 brightness adjustment
ESC & s n m [a
(p1..pa)]x (m-n+1) 1B 26 1 n m
[a(p1..pa)]x (m-n+1)
20<n<=m<=FF define download characters.
a=1-5 p1..p5 =row1..row5
ESC ? 1B 3F delete download characters.
ESC % 1B 25 select/cancel download character set.
ESC _ n 1B 5F n n=0,1 set cursor ON/OFF
ESC f n 1B 66 n select international fonts set
ESC c n 1B 63 n select fonts ,ASCII code or JIS code
ESC = n 1B 3D n
n=1,2,3,31,32,33 select peripheral device, Display or Printer
ESC s 1 1B 73 01 store the user defined characters into EEPROM
ESC d 1 1B 64 01 download the user defined characters from EEPROM
Table 6-1
Note:
While using command "ESC QA" or "ESC QB", these two commands could be used in conjunction with terminal printer models: TP
2688.or TP3688
* If using commands "ESC QA" or "ESC QB
”
, other commands can not be used except using command "CLR" or "CAN" to change the
operating mode.
•
If using commands "ESC QD
”
, the upper line message will move continuously until it receives a new command then will clear the
upper line and move the cursor to upper line left-most position.