Partilink VP-QV41H, User Manual, Page: 17 / 32

13
6. Configurations
6.1 Front Panel Buttons
Please see the section 4.2.
6.2 Remote Control
Please see the section 4.4
6.3 Web UI
You can connect the Ethernet directly from PC to
Quadview Video
Process.
Please follow below steps to configure your PC Ethernet setting.
6.3.1 Directly Connect to PC via Ethernet Cable
a. Click Start > Control Panel > Network and Sharing
Center
b.
Click “Change Adapter Settings”
c. Highlight the network adapter you want to use to
connect to the device and click “Change Settings” of this
connection.
The “Local Area Connection Properties”
window for the selected network adapter.
d. Highlight the Internet Protocol Version 4 (TCP/IPv4)
e. Click Properties. The Internet Protocol Properties
window is relevant to your IT system.
f.
Select “Use the following IP Address for static IP
add
ress” and fill in the details. For TCP/IPv4 you can
use any IP address in the range 192.168.1.1 to
192.168.1.255 (excluding 192.168.1.202).
g. Subnet mask fills in 255.255.255.0.
h.
Click “OK”.