Channel Alarms
Page
4-9
Channel Alarms
Channel alarms has the following set of sub-menus:
•
Enable Channel Alarms
•
0.3µm total count alarm threshold (0 to 999999)
•
0.3µm Enable
•
0.5µm total count alarm threshold (0 to 999999)
•
0.5µm Enable
•
1.0µm total count alarm threshold (0 to 999999)
•
1.0µm Enable
•
5.0µm total count alarm threshold (0 to 999999)
•
5.0 µm Enable
•
Print on Alarm
•
Sound on alarm
Location Setup
This has three sub-menus:
•
Location ID
(0 to 999)
•
Auto-Increment
Location Id after every group measurement (Yes)
•
Auto-Increment
(No)
To set the location ID:
1
From the MENU level, press the
or
buttons until the Location Setup
menu option appears.
2
Press the
button to activate the Location Setup menu set. The Location ID
screen will appear.
3
Press the
button to activate the Location ID edit mode.
4
Use the
or
buttons to navigate to the numeric position you want to edit.
5
Use the
or
buttons to set the number you want in a numeric position.
6
When the number is correct, press the
button to save your setting and return
to the Location Setup navigation level.
7
If you want to change the Auto-Increment settings, use the
to navigate to
the Auto-Increment screen you want to edit.
