QUICK START MK10
8
PARTEX MARKING SYSTEMS
2009-11-27
In the upper right corner there is a section called
”Direct print”. Here you will find printer icons for most
of PARTEX different printers.
Click on the icon for
MK10
3.3 Winsign: Print out
A printer dialog will now appear for the MK10 printer.
Here you can do som adjustments. In
this section we will only show you the
basic settings. Read the user manual
for WinSign for more information
regarding the other settings.
Margin:
Here you can adjust the text on
your marker. You can move the text
position upp or down by typing in a
positiv or negativ value in the box for
Height adjustment.
Type in a positive or negative value in
the box for
Text alignment (+/-)
if you
want to move the text position to the
left or right.
Cut / Perforation depth (1-10)
In the printer there is a default value set how deep the cut should be. (Read the
manual if you want to change that). By adding a value (1-10) in WinSign you can make
the cutting unit cut deeper then the default value that are set in the printer.
Click on the RUN button and choose
the printer
CAB A4+M/300
in the
Print window. Click on OK and your
work will now be printed on the
MK10 printer.
ENGLISH
