Partec ParaStation5, Administrator'S Manual

Page: 56 / 98

52 ParaStation5 Administrator's Guide
range {[nodes] | all }
Preselect or display the default set of nodes
If
nodes
or
all
is given, this directive modifies the default set of nodes all following directives will act
on.
nodes
is given in the same syntax as within any other directive, i.e. a comma separated list of node
ranges
from-to
, where a range might be trivial containing only the
from
part. In this case all further
directives are called as if the
nodes
part or
all
is appended unless a node set is given explicitely.
If neither
nodes
nor
all
is given, the current preselected node set is displayed. Be aware of the fact
that this might not be literally identical to the string given in a previous call to the range directive since
the program tries to find a string as short as possible.
show { accounters | user | group | maxproc | selecttime | psiddebug | rdpdebug | rdpretrans | mcastdebug
| master | freeOnSuspend | handleOldBins | nodesSort | starter | runjobs | overbook | rdppktloss |
rdpmaxretrans | exclusive | pinprocs | cpumap | bindmem | adminuser | admingroup | rl_addressspace
| rl_core | rl_cpu | rl_data | rl_fsize | rl_locks | rl_memlock | rl_msgqueue | rl_nofile | rl_nproc | rl_rss |
rl_sigpending | rl_stack | supplementaryGroups | statusBroadcasts | rdpTimeout | deadLimit | statusTimeout
| rdpClosedTimeout | rdpResendTimeout | rdpMaxACKPend } [
nodes
]
Show various parameters of the ParaStation system.
accounters [
nodes
]
Show information on which node(s) ParaStation accounting processes are running.
user [
nodes
]
Show who grants exclusive access on the selected node(s).
group [
nodes
]
Show which group grants exclusive access on the selected node(s).
maxproc [
nodes
]
Show the maximum number of ParaStation processes on the selected node(s).
selecttime [
nodes
]
Show the timeout of the central select(2) of the ParaStation daemon psid(8) on the selected
node(s).
psiddebug [
nodes
]
Show the debugging mask of the ParaStation daemon psid(8) on the selected node(s).
rdpdebug [
nodes
]
Show the debugging mask of the RDP protocol within the ParaStation daemon psid(8) on the
selected node(s).
rdpretrans [
nodes
]
Show the RDP retransmit counters off the selected node(s).
mcastdebug [
nodes
]
Show the debugging mask of the MCast protocol within the ParaStation daemon psid(8) on the
selected node(s).