Make sure the clamp screws are tightened securely. Occasionally check the screws for
tightness during operation.
2. If the engine restraint cable attachment is equipped
on your engine, an engine restraint cable or chain
should be used. Attach to a secure mounting point
on the boat to avoid the engine being completely lost
if it accidentally falls off the transom.
3. Secure the clamp bracket to the transom using the appropriate bolts. For details, consult your
PARSUN dealer.
WARNING:
Avoid using bolts, nuts or washers inappropriate. After tightening, test running the engine and
check their tightness.
2.2
Breaking in engine
Your new engine requires a period of break-in to allow mating surfaces of moving parts to wear in evenly.
Gasoline and oil mixing:
CAUTION:
Failure to follow the break-in procedure could result in reduced engine life or even severe engine
damage.
1. First 10 minutes:
Run the engine at idle.
10
Break-in period
25:1
Gasoline
1L
12L
14L
24L
Engine oil 0.04L 0.48L 0.56L 0.96L
Summary of Contents for T90BM
Page 70: ...64...
