27
3.8 Changing gear oil
WARNING:
Be sure the outboard motor is securely fastened to the transom or a stable stand.
Never get under the lower unit while the outboard motor is tilted, even when the tilt support lever
or knob is locked. Serious injury could occur if the motor falls.
1. Gear oil drain screw 2.Oil level plug
1.
Tilt the outboard motor so that the gear oil drain screw is at the lowest point possible.
2
2. Place a suitable container under the gear case.
3. Remove gear oil drain screw.
CAUTION:
Change the gear oil after the first 10 hours of operation, and every 100 hours or at 6-month intervals
thereafter. Otherwise the gear will wear quickly.
4. Remove the oil level plug to allow the oil to drain completely.
CAUTION:
Inspect the used oil after it has been drained. If the oil is milky, water is getting into the gear case
which can cause gear damage. Consult PARSUN dealer.
2
1
