St. Bernard Installation Instructions
Page 9 of 19
Step 2: Connect the power supply to the router.
A.
Connect the router power supply to the power supply port on the router, shown in Figure 7.
B.
For St. Bernard A & L,
plug the router power supply into the AC power port on the case.
C.
For St. Bernard G,
plug the router power supply into the NEMA male to female adapter. Plug the
NEMA male to female adapter into AC outlet on the battery pack, shown in Figure 8.
Step 3: Connect the fan to the router (St. Bernard G & L only).
A.
This step only applies to the St. Bernard G and L.
B.
Plug the USB-A cord from the fan into the USB-A port on the router, shown in Figure 7.
Step 4: Connect the router to the RJ-45 ports on the case using ethernet cords (St. Bernard G & L
only).
A.
This step only applies to the St. Bernard G and L
B.
Connect the provided ethernet cords to the LAN and WAN ports on the router, shown in Figure 7.
C.
Connect the other ends of the ethernet cords from the router to the RJ-45 ports on the case. Keep
track of which cord is connected to the WAN port on the router. Consider connecting the WAN port
on the router to the front RJ-45 port and the LAN ports on the router to the back three RJ-45 ports,
as shown in Figure 8.
Figure 8: Connect the router to the RJ-45 ports on the case using ethernet cords.
WAN
LAN 2
LAN 3
LAN 1
