Bloodhound Installation Instructions
Page 14 of 21
Final Assembly
Step 1: Make sure all the cables and devices are properly connected.
A.
Inspect every cable connection and ensure that no connections are loose.
B.
Use cable ties or other wire management to neatly bundle the cables. Pack the cables neatly
inside the bottom half of the case.
Ensure that the antenna cables are not excessively bent (1”
minimum bend radius).
C.
For AER2200 router, ensure that the power switch on the router is turned ON.
Figure 13: Fully Connected 13in1 Newfoundland L with 54K Battery Pack and Cradlepoint IBR1700 Router
