Beagle Installation Instructions
Page 14 of 17
Step 3: Connect the antenna to a computer.
A.
Use an ethernet cable to connect a computer to the RJ-45 port on the case that is connected to
the LAN port on the router.
Step 4: Login to Cradlepoint NetCloud.
A.
Open a web browser on the computer and type 192.168.0.1 into the address bar. This will bring up
the Cradlepoint NetCloud login, shown in Figure 14.
B.
Login to Cradle
point NetCloud. The username is “admin”, and the password is found on
the router,
shown in Figure 15.
Figure 14: Access Cradlepoint NetCloud.
Figure 15: Cradlepoint NetCloud Login Password
