Australian Shepherd Installation Instructions
5.
Interference
–
electrical devices and appliances interfere
with the antenna’s signal.
Electrical devices and appliances, such as refrigerators,
microwaves, AC units, and cameras, can cause
electromagnetic interference with the antenna signal.
Select a location that is as far as possible from electrical
devices and appliances and minimizes the amount of such
devices between the antenna and the signal source(s). For
best antenna performance, install antennas as far away as
possible from each other and other devices. In general,
separate antennas by at least 24 inches (61 cm).
6.
Cable Loss
–
signal strength is lost as RF waves travel
through cables.
The longer the cable, the more electrical energy is lost as heat and the higher the signal loss.
Therefore, it is best to select a location for the antenna that allows the cables to be as short as
possible and still reach the router.
The size of the cable also affects cable loss; coaxial cables with higher center conductor diameters
have less cable loss compared to thinner coaxial cables.
It is critical to avoid bending coaxial cables sharply to avoid shearing of the Aluminum foil shield,
which can result in a significant or complete loss of antenna functionality.
Coaxial cables should not be bent sharply; they have a minimum bend radius which varies
depending on the size of cable.
Hardware Accessories
Accessory
Part Number
Pole Mount Bracket
PTA0638
Customizable Pole Mount Bracket
PTA0640
Roof Mount Bracket Assembly with L Bracket
PTA0641
Magnetic Boot Mount
–
Black
PTA0329
Replacement Rooftop Gasket
PTA0592
Rooftop Gasket
–
Curved Roofs
PTA0766
Hardware Kit for 1.5” Shaft –
Nut/Washer
PTA0761
1.5” Star Washer
PTA0257
Ground Plane with Adhesive Back, 20 in x 20 in, Can Be Cut to Size
PTA0587
Lightning Arrestor
–
SMA(F) to SMA(F)
PTA0476
Lightning Arrestor
–
N(F) to N(M)
PTA0736
SMA Wrench, Key Chain
PTA0194
Service: Cable Sleeving (Priced Per Ft)
Cable Sleeving
*Lightning Arrestors are recommended for outdoor installations
