Parry-British Built for Purpose
IN500-1
5
Safety Instructions
The unit has been designed to easily be moved into position and has four braked castors to
lock in position to avoid movement whilst in operation. Alternatively, the units can be
supplied on adjustable legs for fixed position.
This appliance has been designed to warm products and therefore during its use parts of the
appliance will become very hot. All personnel must be given adequate supervision and
training in the safe use of this appliance.
All appliances other than those fitted with a sealed moulded plug must be fitted with a
sealed moulded plug and must be fitted by a qualified electrician, in accordance with
current regulations.
The unit should be installed in compliance with the Installation Instructions and the
National regulations in force at the time. Particular attention should be paid to the
Health and Safety at Work Act.
To prevent shocks, all appliances whether gas or electric, must be earthed.
To avoid scratching the highly polished exterior surface of this equipment whilst in
transit, the protective film on the exterior surfaces has NOT been removed.
It is IMPORTANT that this protective film is peeled off before the equipment is used.
Ensure that vents intended to provide air flow in and around the unit are not obstructed.
Ensure the appliance is isolated from the power supply before installing, cleaning or
maintaining the appliance
Installation Instructions
The unit has been designed to easily be moved into position and has four braked castors to
lock in position to avoid movement whilst in operation. Alternatively, the units can be
supplied on adjustable legs for fixed position.
Mobile Use
Position the Flexi-Serve unit in the serving position and secure in place using the 4
braked castors.
Units fitted with 13amp plug, plug into a suitable socket.
Static Use
Position the Flexi-Serve unit in the serving position and adjust legs to suit the surface.
Units fitted with 13amp plug, plug into a suitable socket.
