34
MENU
SELECT
Computer input
Adjusting screen size
The size of the screen can be re-set to the value the user desires.
1. Press F. Menu on the remote control to display the
on-screen menu. Press
▲▼
to select the screen. Then
press
►
or press Select.
2. Press
▲▼
to select the desired item, and then press
Select.
This function will make the width-height proportion of the
projected image consistent with the input signals.
T
Will
his item provides the image with the original size. If the
original image is larger than the screen (1920X1200), the projector
automatically enter the selection mode for image display
section. The user can press
▲▼◄►
to select the image
display section. During adjustment, the arrow turns red.
When the max. value is reached, the arrow will disappear.
This item provides normal video images with a width-height
proportion 16:10
This item can help users manually adjust the proportion and
position of the screen.
When this item is selected, press
►
. The indication of
self-definition will appear on the screen. You can press
▲▼
▲▼
to select the items to be adjusted.
Screen Menu
Screen
Normal
True
Digital zoom +
Move
Next
Exit
Navigation keys
Select
Zoom in/out+/-
Remote control
Next
Digital zoom -
Custom
Full
Normal
True
Custom
Full
Scale H/V : To adjust the horizontal/vertical proportion of the
screen.
H&V: When this item is enabled, the width-height
proportion
will be locked. The vertical proportion is displayed in grey,
meaning “disabled”. You can adjust the horizontal proportion,
and then modify the proportion of the screen on
the basis of
the width-height proportion.
Position H/V: To adjust the horizontal/vertical position of
the screen.
Common : Use this
item to save
input adjusted proportion.
When you press Select at this item, a dialog box will pop
up for confirmation. To save the proportion, press Select
at Yes. If you select self-definition, the system will use
the saved proportion.
Reset : This item allows you to re-set the adjusted values.
In the initial state, press Select, and a dialog box will pop
up for confirmation. To re-set the parameters, press Select
at Yes.
After you select the digital zoom +, the on-screen menu
will disappear, while the information on digital zoom +
appears. You can press Select to zoom in the image size,
and press
▲▼◄►
to move the image horizontally and
vertically
The moving is effective only when the image is larger
than the size of the screen.
You can also press D.zoom +or select
on the remote
control to z
The projector
oom in the projected image.
Digital zoom +
After you select the digital zoom -, the on-screen men
will disappear, while the information on digital zoom -
appears. You can press Select to zoom out the imag
size. You can also press
on the
remote control to zoom out the projected image.
To exit the “digital zoom +/-“
mode, press any button except
the D.ZOOM+/- and the SELECT button
To return to Normal size, select “ Screen” in the menu
to adjust screen size, or enter a new input source in the
menu “Input”. Or use keys for digital zoom to adjust
the screen size
√
Note
:
●
can’t display
images with
resolution
higher than 1920
×
1200. If the resolution of the
PC is high than this
value, you should adjust it to
a lower value beforeing
to the PC.
●
●
Image data other than WUXGA (1920X1200)
will
be
modified to those adaptable to the screen size in
the initial state.
If
True
no signal is detected in the menu of PC,
, Full and digital zoom +/- will be disabled.
Digital zoom -
D.zoom - or select
