Parrot CK3100 LCD, Quick Start Manual

Page: 10 / 60

Installing the power cable
Consult the electric wiring of your car radio. For some
vehicles, it is necessary to inverse the positions of the red
and orange wires. Indeed, the red wire of the power cable
must be connected to the permanent 12V, the orange wire to
the 12V ignition and the black wire to the ground. This can
be done simply by reversing both fuse holders located on
the Parrot wiring. To check the polarity of your car radio, you
only have to cut the ignition off once the Parrot CK3100 LCD
installed: the message “Goodbye!” must be displayed.
Do not connect the orange wire to the permanent 12V,
otherwise you can cause the vehicle battery to go flat.
For some vehicles, there is no +12V ignition
on the vehicle connectors. In this case, it is
necessary to connect the orange power cable on
the fuse box or on another ignition power source.
Installing the microphone and the console
The microphone must be aimed at the driver and can be
installed between the sun-visor and the internal rear-view
mirror. To fix the console, use the provided double-sided
tape. Stick it on a plane and clean spot of the dashboard.
► Consult the diagram on p.4-5 for more information about
the installation of the mounting accessories.
Installing the electronic box
Avoid installing the electronic box:
- Near heating or air-conditioning system;
- On a spot directly exposed to sunlight;
- Behind metal walls.
Using the Telephony function
Connecting the phone to the Parrot CK3100 LCD
Before using the Parrot CK3100 LCD with your phone, you
first have to connect both devices. If you are using this
device for the first time, you will have to pair both devices
before connecting them. The pairing process is only required
once.
Some phones use the Bluetooth technology in a
particular way. Check in the
Preferences / Adv.
Preferences / Pair a phone menu if your phone
is listed. Then select the option in the menu.
1. From your Bluetooth ® phone, search for Bluetooth
peripherals (refer to your phone user guide for more
information).
> The list of the available
Bluetooth peripherals is
displayed.
2. Select “
Parrot CK3100 LCD ”.
10