LEON
This sheet is designed to help you with the installation of a Parrot product and is purely for information. Any installation performed in
compliance with the instructions appearing in this document is done under the sole responsibility of the installer, who is entirely responsible
for the quality of the installation. All rights reserved © Copyright 2011 PARROT SA RCS PARIS 394 149 496. May not be reproduced without the
authorisation of Parrot SA. Pictures for information only.
Reassembly
Refit the system using the following procedure:
1 - refit the cover on the left-hand side of the dashboard
2 - refit the cover under the steering wheel
3 - clip back the air conditioning surround and replace screws 5 and 6
4 – reconnect the adaptor and the aerials behind the car stereo and slip them
inside the housing (make sure that you do not trap and cut any screen wires)
5 - refit the 4 screws (1, 2, 3 and 4) for the car stereo
6 - refit the radio surround, paying attention to the screen cable
7 - replace the glove box and replace the 6 screws (7, 8, 9, 10, 11 and 12)
8 - retest to check that the system is working correctly
