ENGLISH
5
When powering up for the first time, you must connect your telephone and your Parrot CK3000. This phase differs for the
Ericsson R520m, T39 and the T20s, T28s, T29s, R320, A2618, and A2628s equipped with a BluetoothTM DBA-10 adaptor.
IMPORTANT:
The CK3000 hands-free kit is operational only when the ignition of the car is switched on.
For Ericsson R520m, T68 and T39, the infrared (IrDa) sensor has to be disabled for the CK3000 to operate. Comply with the
following recommendations: Press
until "Extras";
until " Infrared port", press "Yes", then
until "Disabled" and confirm
by pressing "Yes".
With your telephone switched on, turn on the ignition of your car. Carry out the following sequence on the Ericsson R520m,
T68 and T39 telephones.
For the T68, go to " Connect ", then " Bluetooth ". (Then follow the instructions below).
Press
until "Extras",
until " BluetoothTM " and press "Yes".
until "Paired devices", press Yes.
"add devices", " Yes ".
"phone initiate", press " Yes ".
"Headsets", press" Yes ", then "Prepare headset" is displayed.
"Searching" is displayed.
Then, "Parrot CK3000" is displayed, click on "Yes".
"Add to Parrot devices", press "Yes".
"Connection key" is displayed, type 1234 then press "Yes".
The connection phase is complete and "pairing succeeded" is displayed on your screen.
For more information, refer to the instructions of your Ericsson phone.
These telephones have to be equipped with the BluetoothTM DBA-10 adaptor in order for them to work with Parrot CK3000.
The connection phase in this case is different from the one previously described.
With your telephone switched on, turn on the ignition of your car and return to the Menu. Press
until "Extras", press "Yes".
until "Accessories" and press "Yes". DBA-10, "Yes".
"Paired devices", press "Yes".
until "Headset", press "Yes". "prepare headset", press "Yes". "Searching" is displayed.
"Parrot CK3000" is displayed. "Add Parrot CK3000", "Yes".
"passkey", type 1234 then "Yes".
The connection phase is complete and "pairing succeeded" is displayed on your screen. The CK3000 then emits a sound to
indicate that it has been initialised.
For more information, refer to the Ericson Instructions provided with the DBA-10 adaptor.
Once the connection is complete, you will hear "Your phone book is being downloaded".
Precautions when learning:
The learning phase is important. The reliability of the voice recognition system depends on the quality of the recording. To
obtain the best possible operation, comply with the following recommendations:
Speak up in a clear and natural voice.
Record in a quiet place.
Turn off the radio and the ventilation.
Close the doors and windows.
THE CONNECTION PHASE
CONNECTING ERICSSON R520m , T39 and T68
CONNECTING ERICSSON T20s, T28s, T29s, R320, A2618s and A2628s.
NAME LEARNING
ERICSSON
notice_eng.qxd 14/02/2002 15:39 Page 5
