Parrot bebop 2, User Manual, Page: 14 / 34

14 Flying
Flat trim
Use the flat trim feature to have a flat take-off surface. Launch the flat trim feature after
you change the battery or if the Bebop 2 does not stay on course correctly.
1. Place the Bebop 2 on a flat, dry, unobstructed surface.
2. In the FreeFlight 3 application, go to > Flight settings .
3. Press Flat Trim .
GPS signal
Note: If you are in an area with no GPS reception, the Bebop 2 position will not be
detected.
The icon indicates that the Bebop 2 position is not detected.
The icon indicates that the Bebop 2 position is detected.
Make sure the Bebop 2 position is detected before taking off to register the starting point
correctly.
To display the last GPS position of the Bebop 2:
1. Launch FreeFlight 3.
2. On the main screen, go to > Settings .
3. Press See details .
> The latitude and longitude of the Bebop 2 position appears in the list.
Take off
1. Place the Bebop 2 on a flat and dry surface and in a unobstructed and lit area.
2. Press Take Off .
> The Bebop 2 takes off and hovers at approximately 1 meter above the ground.
Note: make sure the take-of f location of the Bebop 2 is saved. To do so wait f or the icon
to turn green.
Movements
Movements depend on the flight and piloting settings. See the Settings section for further
information. By default, the Joypad option is activated and inverted option is deactivated.