F6288
Installation & Operating Instructions for the
Parrotuncle Owner’s Installation ,Manual
WARNING: SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER
FAN INSTALLATION INSTRUCTIONS
WARNING
Make sure electricity is turned off at the main power box before commencing work. Turn off the power by removing fuse or turning off circuit breaker before installing the fan and replacing the lamps.
• The lowest point on the fan blade must be at least 2.1 metres (7 feet) from the floor.
• Make sure that ceiling joists are strong enough and of adequate size to support the weight of the fan of about 35 kg.
Parrotuncle Lighting, 218 Black Tie Lane, Chapel Hill, NC
www.parrotuncle.com
Parrot Uncle YOU CAN BE SURE OF are trademarks of Eileen Grays LLC.
Used under license by Eileen Grays LLC.
All rights reserved.
Made in
CHINA
7
Rotate 3* E12 bulbs into the lamp holders .
Attach
the light kit cage to the light kit plate using the 4
screws .
(see
F
ig.
7
and
Fi
g.
8
)
8
6
Remove the 4 screws from the light kit
plate
.
Connect the wire
plugs
from the motor housing to
the wire
plugs
from the light kit
plate
, Attach light kit
plate
to the
motor
housing using
4
screws
removed
previously
.
(see Fig.6)
