Parrot Uncle BBCF590, Owner'S Manual, Page: 26 / 31

13. Light Kit LED Driver Replacement
(Continued)
26
LIGHT KIT
LED DRIVER
LIGHT KIT
LED DRIVER
CONNECTOR
LIGHT KIT
LED DRIVER
CONNECTOR
MOTOR DC POWER
CONNECTOR
MOTOR AC POWER
CONNECTOR
Figure 50
OLD LIGHT KIT
LED DRIVER
REMOVE & RETAIN PHILLIPS
HEAD SCREWS (2)
Figure 51
13.10
Squeeze and unclip the Motor AC Power Connector
from the Light Kit LED Driver Connector (Figure 50).
Squeeze and unclip the Motor DC Power Connector
from the Light Kit LED Driver Connector (Figure 50).
13.11
Remove the two Phillips Head Screws from the Old
Light Kit LED Driver (Figure 51).
Retain the Screws for future reinstallation.
Gently pull up on the Old Light Kit LED Driver. Remove
the Driver from the Motor Housing (Figure 51).
Discard the Old Light Kit LED Driver in the correct
recycle bin.
13.12
Place the New Light Kit LED Driver into the Motor
Housing, aligning it directly where the Old Driver had
been (Figure 52).
Install the New Light Kit LED Driver to the Motor
Housing using the two Screws previously removed
(Figure 52).
NEW LIGHT KIT
LED DRIVER
REINSTALL THE PHILLIPS
HEAD SCREWS (2)
Figure 52
BP7513-3 CF590 Volta (EnSpFr) 210201.indd 26 2/1/21 1:55 PM