![background image](http://html1.mh-extra.com/html/parrot-products/op0475/op0475_user-manual_3793754012.webp)
11
Powering On/Off The Projector
Boot operation
1.
Complete the AC power cord and peripheral signal cable(s) connections
2. Switch on power switch or alternatively press the “Power” button on the remote
3. The projector takes a minute or so to warm up, after a few seconds an image will appear on the
screen.
4. A new projector may have an unclear image, in this instance use the Keystone to adjust the image.
Turn off operations
1. Push power key once to turn off the unit
2. Push power key twice to switch the unit onto standby mode