Parmco WD106WF, Installation And Operating Instructions Manual

Page: 8 / 11

Do not use the washer-dryer if industrial chemicals have been used to clean the laundry.
Wipe away lint or packaging debris that has accumulated around the appliance.
Ensure good air ventilation in the room where the appliance is installed to avoid the backflow
of unwanted gases into the room from appliances burning gas or other fuels, including open fires.
Do not dry unwashed items in the washer-dryer.
Items that have been soiled with substances such as vegetable or mineral oil, acetone, alcohol,
petrol, kerosene, spot removers, turpentine, waxes and wax removers should be washed separately
with an extra amount of detergent before being dried in the washer-dryer.
Items such as foam rubber (latex foam), shower caps, water proof textiles, and rubber backed
articles and clothes, or pillows fitted with foam rubber pads should not be dried in the washer dryer.
Fabric softeners, or similar products, should only be used as specified by the product
manufacturer's instructions.
Remove all objects from items that could be a source of fire ignition such as lighters or matches.
Never stop the washer dryer before the end of the drying cycle unless all items are quickly removed
and separated so that residual heat can dissipate.
The appliance must not be supplied through an external switching device, such as a timer,
or connected to a circuit that is regularly switched on and off by a utility.
Exhaust air must not be discharged into a flue which issued for exhausting fumes from any
appliances burning gas or other fuels.
Do not install the appliance behind a lockable door, a sliding door or a door with a hinge on the
opposite side, that would prevent the appliance door from being fully open.
If drying the clothes washed by hands, please choose a appropriate speed to spin and choose a
appropriate time to dry, according to the kind of clothes.
Do not exceed the maximum load which are indicated in the table above.
Ensure the water tap is turned on during the drying process.
To prevent from scald, do not try to open the door. The temperature will drop during the cooling
phase at the end of the programs.
"refresh" program is to refresh the clothes with the drying function, ensure the water tap is turned
on and don't put any detergent or softener in the machine.
WARNING