6
C
- How to connect the electrical main
•
Check to see that the main voltage complies with the one required by the hood, which is indicated on
the tag that is applied on the internal side of the appliance.
•
Assemble a suitable plug on the wire or insert a proper power two-pole switch if it is to be directly
connected to the main with a 3mm minimum opening between the contacts of the main and the
appliance. All the above mentioned electrical parts must comply with the current standards.
•
The yellow/green earthing cable (if included) must not be interupted.
D - Operating checks (Fig. 4)
•
Check lights and motor start-up on all three speeds.
•
Reassemble the lower filterholding frame by means of the 4 screws.
