12
If you are unable to identify or solve the problem, contact our Service Department.
Before calling, make a note of the model, serial number, and purchase date of your
machine. The Service Department will require this information.
Problem
Cause
Solution
Will not start
Power cut
Plug is not plugged in
tight
Over loaded
Safety cut out was
activated
Check the power source
Make sure the plug is in tight
to the socket
Remove some clothing until
the drum can spin freely
Reset the safety switch
External hot or
can smell hot
The lint filter is dirty
The exhaust and/or
ducting is dirty
Make sure the filter is clean
Clothes too dry
The machine is
overloaded
Not to take out the
clothes before cycle has
finished
The temperature
selected is too high
Make sure machine is not
overloaded
Tale out clothes immediately
when cycle has finished
Check the labels on the
clothes
Clothes shrink
Too dry
Check the labels on the
clothes
Take out the clothes when
slightly damp and hang the
clothes to fully dry
Should the appliance be moved, it must be transported vertically.
Troubleshooting
