USE
Automatic controlled drying
The appliance detects the moisture in the load and automatically adjust the drying
time for optimal drying. Just select the programme according to fabrics. This drying
system is good for the cottons, synthetics sections and the anti-bacterial, silk
programme.
Time controlled drying
Can be used to finish off drying if necessary. Select the 60 or 90 minute programme
for cottons or the 30 minute programme for synthetics. To cancel a programme
which is running, turn the programme selector dial to “O”. At the end of drying, turn
the selector dial to “O” to switch the machine off before removing the laundry.
Programme option buttons
Depending on the programme, different functions can be combined. These must be
selected after choosing the desired programme and before pressing the Start/Pause
button. When these buttons are pressed, the corresponding pilot lights come on.
When they are pressed again, the pilot lights go out.
Incorrect option selection
If you select an option that is not compatible with the programme you have
selected, the option will not be selected. If you selected the “Buzzer” option, the
buzzer will sound.
Select Delay Start
This button allows you to delay the start of the programme by 12 hours
maximum. This option must be selected after selecting the programme and
before pressing Start/Pause to start the programme. The programme is for 3,
6, or 12 hours.
It can be selected before or after selecting the programme option (Buzzer, Quick,
Delicate). The countdown begins after you have pressed the Start/Pause button
and the corresponding light illuminates. Press the button repeatedly to choose
the programme 3, 6, or 12 hours. This option can not be selected when a Special
programme is selected.
If you have selected a delay time via the button, the display will show it. The
countdown is calculated automatically once you press the Start/Pause button. If you
want to check the selected programme, press the Start/Pause button again to show
the duration of the previously selected programme. This function cannot be used
with Special programmes.
Use Process
7
